Materials Engineer – ANZSCO 233112

Materials Engineer investigates the properties of metals, ceramics, polymers, and other materials and assesses and develops their engineering and commercial applications.
Skill Level
1
Skills Assessment Requirement

Unless you are exempt in very limited circumstances, you are required to have a positive Skills Assessment to apply for the visas listed above.

Skills Assessment authority for Materials Engineer is Engineers Australia. To have a positive skills assessment, you must meet the following criteria:

  • Six pathways for skills assessment by Engineers Australia:
    • Pathway A – If you hold an accredited qualification:
      • Australian qualification pathway if you have studied in Australia and hold a qualification which is accredited by Engineers Australia
      • Washington accord qualification pathway if your qualification is from a country which is a full signatory to the Washington Accord
      • Sydney accord qualification pathway if your qualification is from a county which is a full signatory to the Sydney Accord
      • Dublin accord qualification pathway if your qualification is from a country which is a full signatory to the Dublin Accord
      • You otherwise hold other recognised qualifications
    • Pathway B – Competency Demonstration Report Pathway
      • If you do not hold an accredited qualification or do not want to be assessed according to your degree title or course content
    • Competent English level = IELTS 6
    • For any of the qualification pathways you are required to provide:
      • CV/Resume containing a full summary of your engineering education and work experience
      • Academic degree certificate (a letter of completion will only be accepted as a substitute before graduation and only for Australian qualifications)
      • Complete and official academic transcript (including any recognition of prior learning and course syllabus where applicable)
      • Official English translations of above documents where applicable
    • For the competency demonstration report pathway, you are required to provide and prepare:
      • CV/Resume containing a full summary of your engineering education and work experience
      • A reference letter or certificate from your employer on official company letterhead
      • A report containing evidence of continuing professional development, three ‘career episodes’ (each describing a specific aspect of your engineering activity) and a summary statement

Did you know?

When applying under any of the Accord Qualification PathwaysEngineers Australia will only consider your qualification if it was obtained the same year or after the country in which you studied became a full Signatory.

You can follow these links for relevant dates and signatory details:

Washington Accord Pathway:follow this link

Sydney Accord Pathway:follow this link

Dublin Accord Pathway: follow this link

Potential Visa Pathways for Materials Engineer
ANZSCOOccupationSkills Assessment189190485 491 (State)491 (Family)186 (Direct)407 (Training)494 (regional Sponsored)482 (TSS Medium Term)
233112Materials EngineerEngineers Australia

Group: 2331 Chemical and Materials Engineers

Description
Design and prepare specifications for chemical process systems and the construction and operation of commercial-scale chemical plants, supervise industrial processing and fabrication of products undergoing physical and chemical change, and investigate the properties of metals, ceramics, polymers and other materials and assess and develop their engineering and commercial applications.
Tasks
  • Preparing designs for chemical process systems and planning control systems for processes such as those used to remove and separate components, effect chemical changes, test and evaluate fuels, transfer heat, and control the storing and handling of solids, liquids and gases
  • Monitoring the operation and maintenance of equipment to achieve maximum efficiency under safe operating conditions
  • Ensuring correct materials and equipment are used and that they conform to specifications
  • Diagnosing malfunctions in chemical plants and instituting remedial action
  • Studying product utilisation and pollution control problems
  • Reviewing plans for new products and submitting material selection recommendations in accordance with design specifications and factors such as strength, weight and cost
  • Planning and implementing laboratory operations to develop new materials and fabrication procedures for new materials to fulfil production cost and performance standards
  • Conferring with producers of materials, such as metals, ceramics, polymers, cements and elastomers, during the investigation and evaluation of materials suitable for specific product applications
  • Reviewing product failure data and implementing laboratory tests to establish or reject possible causes, and advising on ways to overcome any problems
Skill Level
In Australia and New Zealand:

Most occupations in this unit group have a level of skill commensurate with a bachelor’s degree or higher qualification (ANZSCO Skill Level 1). In some instances, relevant experience and/or on-the-job training may be required in addition to the formal qualification. This occupation may require registration or licensing.

Occupations in this Group
  • 233111 Chemical Engineer
  • 233112 Materials Engineer
How to calculate your points (skilled visas)

To apply for a skilled visa, you need to know how many points you can score. The minimum score to be eligible for application is 65 points. However, depending on your occupation, the competitiveness, and the states you are applying to, you might need to score more points to get an invite.

Points will be given to you based on the following:

Click here to calculate your points.

189 visa – Skilled Independent Visa

This 189 visa allows you to live, work and study in Australia permanently. It is a points-tested visa. The minimum score to apply is 65 points. However, based on previous invitation rounds, you would need to achieve a higher score to have a better chance of obtaining an invitation.

In short, to be eligible for visa 189, you need to meet the following criteria:

Immigration Points

Must score at least 65 points. Due to the competitive nature of this visa, a pool mark does not guarantee an invitation to apply.

English

Must have at least Competent English, i.e., IELTS 6.0 or equivalent.

Age

Must be under 45 years of age. There is however no age limit for the 189 NZ stream.

be invited

Must lodge the EOI and be invited by the Department of Home Affairs to apply for the visa.

Skills assessment

Must have positive skills assessment. Each occupation has a specific assessing authority.

HEALTH AND CHARACTER

Must meet health and character requirements.

Subclass 190 visa– Skilled Nominated Visa & Subclass 491 visa – Skilled Work Regional (Provisional) Visa

To apply for visa subclass 190 and visa subclass 491, you need to have a nomination from the state/territory government where you want to live and work. Each State and Territory have individual requirements that must be met in order to receive nomination. (See below)

While the 190 visa is a permanent visa, subclass 491 visa gives you right to live and work in regional Australia for 5 years with a pathway to permanent residency through the subclass 191 visa.

Another difference between the 190 and 491 visa is that you can only apply for visa subclass 491 if you are living and working in regional areas in Australia, while it is not a requirement if you are applying for the 190 visa.

In summary, to be eligible for 190 visa, you need to meet the following criteria:

Immigration Points

Must score at least 65 points, or higher points if the state or territory requires.

English

Must have at least Competent English, i.e., IELTS 6.0 or equivalent, or higher if the state or territory requires.

Age

Must be under 45 years of age.

be invited

Must lodge an EOI and be invited by the state or territory and then apply for the visa.

Skills assessment

Must have positive skills assessment. Each occupation has a specific assessing authority.

HEALTH AND CHARACTER

Must meet health and character requirements.


To check if the state/ territory government requirements for your occupation, refer to the following links

State/ Territory
Links to requirements
New South Wales
Victoria
South Australia
Western Australia
Northern Territory
Australian Capital Territory (ACT)
Tasmania
Queensland

485 Visa – Graduate Temporary Visa (Graduate Work Stream)

The 485 visa is a work visa available to international students who have completed two years of study in Australia. It is an 18-month visa that has full work rights and full study rights. It also allows you to travel freely to and from Australia throughout the validity of the visa.

To be eligible for visa 485, you need to meet the following criteria:

Age

You must be under 50 years of age.

Education

Must have completed a two-year CRISCOS registered course(s).

Subclass 491 Family Sponsored visa – Skilled Work Regional (Provisional) visa

This 491 Family sponsored visa requires you to have a family member who is living in regional area to sponsor you. This visa offers pathway to permanent residency through visa subclass 191.

English

Must have at least Competent English, i.e., IELTS 6.0 or equivalent.

Age

Must be under 45 years of age.

be invited

Must lodge an EOI and be invited by DHA to apply for the visa.

Skills assessment

Must have positive skills assessment. Each occupation has a specific assessing authority.

HEALTH AND CHARACTER

Must meet health and character requirements.

Subclass 186 visa – Employer Nomination Scheme

If you have an employer who is willing to sponsor you, you may be eligible for a Subclass 186 visa. This visa is permanent and will allow you to live, work and study in Australia indefinitely. To be eligible for this visa, you need to have at least 3 years of working experience in your nominated occupation and a positive skills assessment. Alternatively, if you are a holder of a Subclass 457 or TSS visa, you can apply for Subclass 186 after working for your employer for at least 3 years under the Temporary Residence Transition stream.

Experience

At least 3-year fulltime work experience in the nominated occupation.

English

Must have at least Competent English, i.e., IELTS 6.0 or equivalent.

Age

Must be under 45 years of age, unless exempt.

Be Sponsored

Must be sponsored by an Australian employer.

Skills assessment

Must have a positive skills assessment. Exemptions apply for the 186TRT.

HEALTH AND CHARACTER

Must meet health and character requirements.

407  Training Visa

The 407 visa a short stay visa for individuals to participate in occupational training or professional development in Australia. This visa is generally valid to stay in Australia for 2 years. Please note this visa is subject to condition 8102 which forbids work apart from the training that is specified in the visa application. You are also required to maintain health insurance whilst in Australia.

To be eligible for visa 407, you need to meet the following criteria:

GTE

You must prove that you genuinely stay in Australia for training and will depart when you complete the training.

English Level

Must have Functional English, i.e. IELTS overall 4.5 with no band less than 4, or equivalent.

Age

Must be over 18 years old.

Be Sponsored

You must be sponsored by an approved temporary activities sponsor – Can be an employer or a commonwealth agency

Health and Character

Must meet health and character requirements.

Subclass 494 visa – Skilled Sponsored Regional (Provisional) visa

You can apply for subclass 494 if you have a regional employer who is willing to sponsor you. To be eligible for this visa, you must have at least 3 years of working experience in your nominated occupation and have a relevant skills assessment. With this visa, there is a requirement that you must work for the employer who is sponsoring you.

This visa provides pathway to permanent residency through the 191 visa.

Experience

At least 3 years full-time work experience in the nominated occupation.

English

Must have at least Competent English, i.e., IELTS 6.0 or equivalent.

Age

Must be under 45 years of age, unless exempt.

Be Sponsored

Must be sponsored by an Australian regional employer.

Subclass 482 visa – Temporary Skill Shortage (Medium Term) visa

The Subclass 482 visa is a Temporary Skill Shortage visa that requires a sponsorship from an Australian employer. This visa allows to your live and work in Australia for up to 4 years. You may apply for as many 482 visas as you want, as long as the employer is willing to sponsor you.

English Level

Must have IELTS overall of atleast 5.0 with no band less than 5.0.

Age

There is no age requirement for this visa.

Health and Character

Must meet health and character requirements.

Job Outlook

  • $3,019 AUD

    Weekly Earnings

  • 84%

    Work full time hours

  • Moderate

    Growth expected in the next 5 years

  • 17% female

    Gender share

  • 44 hours

    Average full-time

  • Very High skill

    Skill level rating

Book a consultation with our Registered Migration Agents in Melbourne to find out more about your visa options and your path to Australian permanent residency or applying for citizenship.

Study Pathways for Materials Engineer

To become a Materials Engineer you need a bachelor degree in engineering, majoring in materials engineering. Postgraduate studies may also be useful.

A Bachelor of Engineering qualifies you to be an accredited professional engineer. It develops problem solving skills and is strengthened by integrated work placement, and practical hands-on design-and-build activities.

The course develops through four themes that combine to underpin engineering practice:

  • Engineering fundamentals and foundational skill
  • Engineering design
  • Engineering knowledge and application
  • Professional practice
  • Duration: 4 years full time
  • Cost: Approx AUD $39,800
  • Have graduated an equivalent Australian Year 12
  • Must have completed the following subject prerequisites or their equivalents:
    • English
    • Maths
    • Chemistry or Physics
  • Masters in Material Engineering