Aircraft Maintenance Engineer (Mechanical) – ANZSCO 323112

Description
Inspects, tests, repairs and installs aircraft hydromechanical and flight system components and aircraft engines, subassemblies and components. Registration or licensing may be required.
Skill Level
3
Specialisations
  • Aircraft Maintenance Engineer (Airframes)
  • Aircraft Maintenance Engineer (Engines)
  • Aircraft Technician (Air Force, Army)
  • Aviation Technician Aircraft (Navy)
  • Licensed Aircraft Maintenance Engineer (Airframes)
  • Licensed Aircraft Maintenance Engineer (Engines)

Skills Assessment Requirement

Unless you are exempt in very limited circumstances, you are required to have a positive Skills Assessment to apply for the visas listed above.

Skills Assessment authority for Aircraft Maintenance Engineer is Trades Recognition Australia (TRA). To have a positive skills assessment, you must meet the following criteria:

  • Three Programs for skills assessment with TRA.
    • Program A-  Offshore Skills Assessment (OSAP)
      • If your passport is on this OSAP Nominated Occupation and Country list next to your occupation  you must apply through OSAP. If your passport is not on this list, apply through Program B or C.
      • OSAP Pathway 1– for applicants who do not hold an Australian qualification in their trade but hold a qualification which is equivalent to an AQF cert
      • OSAP Pathway 2 –  for applicants who hold:
        • a relevant Australian qualification, or
        • a current identified Australian occupational licence
      • To be eligible to apply for the skills assessment program, you must be able to show you have completed full-time paid employment in your nominated occupation, or an occupation that is directly related to your nominated occupation.
    • Program B Migration Skills Assessment
      • You must have a qualification directly related to your nominated occupation (i.e. Aeroskills Training or an Engineering Degree) or at least 3 years of relevant experience
      • If you have obtained a qualification internationally or an Australian qualification that was not through the Australian Recognition of Learning process, you are required to demonstrate 3 years full time or equivalent post-qualification experience
      • If you have obtained an Australian qualification issued through the Australian Recognition of Learning process, you are required to demonstrate 3 years full-time or equivalent post-qualification experience OR 6 years full-time or equivalent experience which can be either pre- or post-qualification
    • Pathway B- Temporary Skills Shortage Skills Assessment
      • For applicants who require a skills assessment to apply for the Temporary Skill Shortage visa (subclass 482)

Did you know?

As part of the OSAP program you will be required to participate in a technical assessment of your skills and knowledge. This will be conducted by a qualified assessor who will also be a qualified tradesperson in your nominated occupation.

 

Potential Visa Pathways for Aircraft Maintenance Engineer

ANZSCOOccupationSkills Assessment189190485 491 (State)491 (Family)186 (Direct)407 (Training)494 (regional Sponsored)482 (TSS Short Term)
323111Aircraft Maintenance Engineer TRAx x x x

Group: 3231 Aircraft Maintenance Engineers

Description
maintain and repair aircraft structures, and avionic and mechanical systems.
Tasks
  • dismantling, inspecting, testing, repairing and reassembling aircraft engines, ancillary motors and engine accessories, electrical systems, and subassemblies of aircraft frames
  • installing electrical circuits and equipment
  • testing aircraft communication equipment, aircraft instrumentation and electronic systems using electronic testing equipment and specialised test apparatus
  • replacing and testing aircraft oxygen system components
  • assembling parts and subassemblies of aircraft frames
  • conducting routine pre-flight inspections of engines, aircraft frames and mechanical systems
  • maintaining records of action taken
  • may manufacture aircraft electrical, instrument and radio hardware components
Skill Level
Most occupations in this unit group have a level of skill commensurate with the qualifications and experience outlined below.
In Australia:
AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)

In New Zealand:
NZ Register Level 4 qualification (ANZSCO Skill Level 3)

At least three years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.
Registration or licensing may be required.

Occupations in this Group
  • 323111 Aircraft Maintenance Engineer (Avionics)
  • 323112 Aircraft Maintenance Engineer (Mechanical)
  • 323113 Aircraft Maintenance Engineer (Structures)

Subclass 190 visa– Skilled Nominated Visa & Subclass 491 visa – Skilled Work Regional (Provisional) Visa

To apply for visa subclass 190 and visa subclass 491, you need to have a nomination from the state/territory government where you want to live and work. Each State and Territory have individual requirements that must be met in order to receive nomination. (See below)

While the 190 visa is a permanent visa, subclass 491 visa gives you right to live and work in regional Australia for 5 years with a pathway to permanent residency through the subclass 191 visa.

Another difference between the 190 and 491 visa is that you can only apply for visa subclass 491 if you are living and working in regional areas in Australia, while it is not a requirement if you are applying for the 190 visa.

In summary, to be eligible for 190 visa, you need to meet the following criteria:

Immigration Points

Must score at least 65 points, or higher points if the state or territory requires.

English

Must have at least Competent English, i.e., IELTS 6.0 or equivalent, or higher if the state or territory requires.

Age

Must be under 45 years of age.

be invited

Must lodge an EOI and be invited by the state or territory and then apply for the visa.

Skills assessment

Must have positive skills assessment. Each occupation has a specific assessing authority.

HEALTH AND CHARACTER

Must meet health and character requirements.


To check if the state/ territory government requirements for your occupation, refer to the following links

State/ Territory
Links to requirements
New South Wales
Victoria
South Australia
Western Australia
Northern Territory
Australian Capital Territory (ACT)
Tasmania
Queensland

407  Training Visa

The 407 visa a short stay visa for individuals to participate in occupational training or professional development in Australia. This visa is generally valid to stay in Australia for 2 years. Please note this visa is subject to condition 8102 which forbids work apart from the training that is specified in the visa application. You are also required to maintain health insurance whilst in Australia.

To be eligible for visa 407, you need to meet the following criteria:

GTE

You must prove that you genuinely stay in Australia for training and will depart when you complete the training.

English Level

Must have Functional English, i.e. IELTS overall 4.5 with no band less than 4, or equivalent.

Age

Must be over 18 years old.

Be Sponsored

You must be sponsored by an approved temporary activities sponsor – Can be an employer or a commonwealth agency

Health and Character

Must meet health and character requirements.

Subclass 494 visa – Skilled Sponsored Regional (Provisional) visa

You can apply for subclass 494 if you have a regional employer who is willing to sponsor you. To be eligible for this visa, you must have at least 3 years of working experience in your nominated occupation and have a relevant skills assessment. With this visa, there is a requirement that you must work for the employer who is sponsoring you.

This visa provides pathway to permanent residency through the 191 visa.

Experience

At least 3 years full-time work experience in the nominated occupation.

English

Must have at least Competent English, i.e., IELTS 6.0 or equivalent.

Age

Must be under 45 years of age, unless exempt.

Be Sponsored

Must be sponsored by an Australian regional employer.

Subclass 482 visa – Temporary Skill Shortage (Short Term)

The Subclass 482 visa is a Temporary Skill Shortage visa that requires a sponsorship from an Australian employer. The TSS short term stream visa allows to your live and work in Australia for up to 2 years each time you are granted this visa. You may apply for two 482 visas in the short stream onshore and subsequent ones offshore, as long as the employer is willing to sponsor you. The TSS 482 short term stream does not have a path to permanent residency throught the 186 visa.

English Level

Must have IELTS atleast 5.0 with no band less than 4.5.

Age

There is no age requirement for this visa.

Health and Character

Must meet health and character requirements.

Job Outlook

  • $1890

    Weekly Earnings

  • 96%

    Work full time hours

  • Moderate

    Growth expected in the next 5 years

  • 5% female

    Gender share

  • 43 hours

    Average full-time

  • Medium skill

    Skill level rating

Book a consultation with our Registered Migration Agents in Melbourne to find out more about your visa options and your path to Australian permanent residency or applying for citizenship.

Study Pathway for Aircraft Maintenance Engineer

To become an Aircraft Maintenance Engineer you usually need to complete a Diploma of Aircraft Maintenance Engineering or other related courses.

In a Diploma of Aircraft Maintenance Engineering, students learn the skills to maintain jet engines, brake and undercarriage systems, structural components, cabin pressurisation, fuel and pneumatic components, flight controls, hydraulics and much more.

  • Duration: Approx 90 weeks
  • Cost: Approx AUD $52,500 in total for international students
  • Academic IELTS 5.5 (or equivalent)
  • Evidence of completion of Year 12 or equivalent, with a pass in Mathematics (at minimum Year 10 or equivalent). Where an applicant does not meet these requirements, some course providers may consider sufficient relevant work experience (documented via a resume and referees)
  • Certificate IV in Aeroskills