Fitter (General) – ANZSCO 323211

Description
Fits and assembles metal parts and subassemblies to fabricate production machines and other equipment.
Skill Level
3
Specialisations
  • Computer Numeric Control Setter
  • Diesel Fitter-Mechanic
  • Fitter-Machinist
  • Fitter-Mechanic
  • Maintenance Fitter
  • Mechanic (Diesel and Heavy Earthmoving Equipment)
  • Plant Mechanic

Skills Assessment Requirement

Unless you are exempt in very limited circumstances, you are required to have a positive Skills Assessment to apply for the visas listed above.

Skills Assessment authority for Fitter is Trades Recognition Australia (TRA). To have a positive skills assessment, you must meet the following criteria:

  • Three Programs for skills assessment with TRA.
    • Program A-  Offshore Skills Assessment (OSAP)
      • If your passport is on this OSAP Nominated Occupation and Country list next to your occupation, you must apply through OSAP. If your passport is not on this list, apply through Program B or C.
      • OSAP Pathway 1– for applicants who do not hold an Australian qualification in their trade but hold a qualification which is equivalent to an AQF cert
      • OSAP Pathway 2 –  for applicants who hold:
        • a relevant Australian qualification, or
        • a current identified Australian occupational licence
      • To be eligible to apply for the skills assessment program, you must be able to show you have completed full-time paid employment in your nominated occupation, or an occupation that is directly related to your nominated occupation  To view the employment standards click here.
    • Program B Migration Skills Assessment
      • You must have a qualification directly related to your nominated occupation  or at least 3 years of relevant experience
      • If you have obtained a qualification internationally or an Australian qualification that was not through the Australian Recognition of Learning process, you are required to demonstrate 3 years full time or equivalent post-qualification experience
      • If you have obtained an Australian qualification issued through the Australian Recognition of Learning process, you are required to demonstrate 3 years full-time or equivalent post-qualification experience OR 6 years full-time or equivalent experience which can be either pre- or post-qualification
    • Pathway B- Temporary Skills Shortage Skills Assessment

Did you know?

As part of the OSAP program you will be required to participate in a technical assessment of your skills and knowledge. This will be conducted by a qualified assessor who will also be a qualified tradesperson in your nominated occupation.

Potential Visa Pathways for Fitter

ANZSCOOccupationSkills Assessment189190485 491 (State)491 (Family)186 (Direct)407 (Training)494 (regional Sponsored)482 (TSS Medium Term)
323211Fitter (General)TRA

Group: 3232 Metal Fitters and Machinists

Description
fit and assemble fabricated metal parts into products, set up machining tools, production machines and textile machines, and operate machining tools and machines to shape metal stock and castings.
Tasks
  • studying drawings and specifications to determine suitable material, method and sequence of operations, and machine settings
  • fitting fabricated metal parts into products and assembling metal parts and subassemblies to produce machines and equipment
  • checking fabricated and assembled metal parts for accuracy, clearance and fit using precision measuring instruments
  • setting guides, stops and other controls on machining tools, setting up prescribed cutting and shaping tools and dies in machines and presses, and setting controls for textile machines
  • forming metal stock and castings to fine tolerances using machining tools to press, cut, grind, plane, bore and drill metal
  • cutting, threading, bending and installing hydraulic and pneumatic pipes and lines
  • preparing pattern mechanisms to control the operation of textile machines used to spin, weave, knit, sew and tuft fabric
  • diagnosing faults and performing operational maintenance of machines, and overhauling and repairing mechanical parts and fluid power equipment
  • may erect machines and equipment on-site
Skill Level
Most occupations in this unit group have a level of skill commensurate with the qualifications and experience outlined below.
In Australia:
AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)

In New Zealand:
NZ Register Level 4 qualification (ANZSCO Skill Level 3)

At least three years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.

Occupations in this Group
  • 323211 Fitter (General)
  • 323212 Fitter and Turner
  • 323213 Fitter-Welder
  • 323214 Metal Machinist (First Class)
  • 323215 Textile, Clothing and Footwear Mechanic
  • 323299 Metal Fitters and Machinists nec
189 visa – Skilled Independent Visa

This 189 visa allows you to live, work and study in Australia permanently. It is a points-tested visa. The minimum score to apply is 65 points. However, based on previous invitation rounds, you would need to achieve a higher score to have a better chance of obtaining an invitation.

In short, to be eligible for visa 189, you need to meet the following criteria:

Immigration Points

Must score at least 65 points. Due to the competitive nature of this visa, a pool mark does not guarantee an invitation to apply.

English

Must have at least Competent English, i.e., IELTS 6.0 or equivalent.

Age

Must be under 45 years of age. There is however no age limit for the 189 NZ stream.

be invited

Must lodge the EOI and be invited by the Department of Home Affairs to apply for the visa.

Skills assessment

Must have positive skills assessment. Each occupation has a specific assessing authority.

HEALTH AND CHARACTER

Must meet health and character requirements.

Subclass 190 visa– Skilled Nominated Visa & Subclass 491 visa – Skilled Work Regional (Provisional) Visa

To apply for visa subclass 190 and visa subclass 491, you need to have a nomination from the state/territory government where you want to live and work. Each State and Territory have individual requirements that must be met in order to receive nomination. (See below)

While the 190 visa is a permanent visa, subclass 491 visa gives you right to live and work in regional Australia for 5 years with a pathway to permanent residency through the subclass 191 visa.

Another difference between the 190 and 491 visa is that you can only apply for visa subclass 491 if you are living and working in regional areas in Australia, while it is not a requirement if you are applying for the 190 visa.

In summary, to be eligible for 190 visa, you need to meet the following criteria:

Immigration Points

Must score at least 65 points, or higher points if the state or territory requires.

English

Must have at least Competent English, i.e., IELTS 6.0 or equivalent, or higher if the state or territory requires.

Age

Must be under 45 years of age.

be invited

Must lodge an EOI and be invited by the state or territory and then apply for the visa.

Skills assessment

Must have positive skills assessment. Each occupation has a specific assessing authority.

HEALTH AND CHARACTER

Must meet health and character requirements.


To check if the state/ territory government requirements for your occupation, refer to the following links

State/ Territory
Links to requirements
New South Wales
Victoria
South Australia
Western Australia
Northern Territory
Australian Capital Territory (ACT)
Tasmania
Queensland

485 Visa – Graduate Temporary Visa (Graduate Work Stream)

The 485 visa is a work visa available to international students who have completed two years of study in Australia. It is an 18-month visa that has full work rights and full study rights. It also allows you to travel freely to and from Australia throughout the validity of the visa.

To be eligible for visa 485, you need to meet the following criteria:

Age

You must be under 50 years of age.

Education

Must have completed a two-year CRISCOS registered course(s).

Subclass 186 visa – Employer Nomination Scheme

If you have an employer who is willing to sponsor you, you may be eligible for a Subclass 186 visa. This visa is permanent and will allow you to live, work and study in Australia indefinitely. To be eligible for this visa, you need to have at least 3 years of working experience in your nominated occupation and a positive skills assessment. Alternatively, if you are a holder of a Subclass 457 or TSS visa, you can apply for Subclass 186 after working for your employer for at least 3 years under the Temporary Residence Transition stream.

Experience

At least 3-year fulltime work experience in the nominated occupation.

English

Must have at least Competent English, i.e., IELTS 6.0 or equivalent.

Age

Must be under 45 years of age, unless exempt.

Be Sponsored

Must be sponsored by an Australian employer.

Skills assessment

Must have a positive skills assessment. Exemptions apply for the 186TRT.

HEALTH AND CHARACTER

Must meet health and character requirements.

Subclass 494 visa – Skilled Sponsored Regional (Provisional) visa

You can apply for subclass 494 if you have a regional employer who is willing to sponsor you. To be eligible for this visa, you must have at least 3 years of working experience in your nominated occupation and have a relevant skills assessment. With this visa, there is a requirement that you must work for the employer who is sponsoring you.

This visa provides pathway to permanent residency through the 191 visa.

Experience

At least 3 years full-time work experience in the nominated occupation.

English

Must have at least Competent English, i.e., IELTS 6.0 or equivalent.

Age

Must be under 45 years of age, unless exempt.

Be Sponsored

Must be sponsored by an Australian regional employer.

Subclass 482 visa – Temporary Skill Shortage (Medium Term) visa

The Subclass 482 visa is a Temporary Skill Shortage visa that requires a sponsorship from an Australian employer. This visa allows to your live and work in Australia for up to 4 years. You may apply for as many 482 visas as you want, as long as the employer is willing to sponsor you.

English Level

Must have IELTS overall of atleast 5.0 with no band less than 5.0.

Age

There is no age requirement for this visa.

Health and Character

Must meet health and character requirements.

Job Outlook

  • $2062

    Weekly Earnings

  • 94%

    Work full time hours

  • stable

    Growth expected in the next 5 years

  • %1 female

    Gender share

  • 51 hours

    Average full-time

  • Medium skill

    Skill level rating

Study Pathway to Fitter (General)

To become a Fitter (General) you need extensive experience, or a certificate III in engineering – mechanical trade. This course is often completed as part of an apprenticeship.

Certificate III in Engineering – Mechanical Trade

  • Duration: 63 weeks
  • Total Course Cost Approx: $12,250 AUD
  • Must be 18 years old or over
  • English proficiency requirement – IELTS 5.5 overall
  • Must undertake a Language, Literacy and Numeracy test (LLN)
  • Certificate III in Engineering – Fabrication Trade

Book a consultation with our Registered Migration Agents in Melbourne to find out more about your visa options and your path to Australian permanent residency or applying for citizenship.